Fixing Stripped Player Rods on a Classic Sports Bubble Hockey Table

When the players stop answering the rods

A bubble hockey table is a game-room favorite until one player stops cooperating. You twist the rod and nothing happens, or the player turns only part of the way, or you feel the rod slip and click. On many tables, the cause is a worn or stripped gear inside the mechanism that turns the player.

The hard part is finding parts. Classic Sports Company tables typically lack readily available serial numbers or part catalogs, and OEM gears can be impossible to find online. That's why we made our Classic Sports Bubble Hockey Replacement Gears.

Signs of stripped gears

  • The player spins freely or won't rotate when you twist the rod
  • The player turns only part of the way
  • You feel slipping or clicking when you twist
  • One player responds worse than the others

If you're seeing any of these, the gears are a good place to look.

Does this fit your table?

This is the most important step. These gears are designed specifically for the Classic Sports Company mechanism found on tables approximately 20 years old.

They are not interchangeable with:

  • Super Chexx (ICE)
  • Carrom Super Stick
  • MD Sports
  • Shelti
  • Other common brands

Since Classic Sports models rarely have serial numbers or part catalogs, confirm fitment with your specific table before ordering. If you're unsure, send us photos of your table and the gear mechanism.

What's included

Each order is one set of 2 replacement actuating gears, for $18.

Note: the mounting carrier (as designed for the original assembly) is not included.

Have or need a carrier? Reach out with your carrier dimensions and other details; we may be able to include one with your first order.

Need more than one? Reach out, as discounts may apply. That's handy if several players are worn, or if you're restoring more than one table.

Why replacement gears help

According to the product page, the gears are:

  • A direct-fit replacement for Classic Sports Company bubble/rod hockey tables
  • More durable than the original equipment gears
  • Made to restore full rotation and precise player control
  • 3D printed for the Classic Sports mechanism

Replacing the gears

You'll need basic hand tools. Take a few photos as you go, so you can put everything back the same way.

  1. Remove the rod and player.
  2. Remove the carrier.
  3. Replace the gears in the carrier.
  4. Reinstall the carrier.
  5. Reinstall the rod and player, then twist the rod to check for full rotation.

Tips to keep the table playing

  • Don't force a stuck rod. Cranking on it can damage other parts.
  • Fix it early. A slipping gear tends to get worse with play.
  • Replace worn gears before a big game night, so the table isn't sidelined when you need it.

Restoring an older table

Many Classic Sports tables are around 20 years old and have spent years in basements and game rooms. If one player has stripped gears, check the others while you have the table open. Gears that are worn but still working may be next. Fixing them all at once saves you from opening the table twice, and it's a good reason to ask about multiple sets.

If another hard-to-find piece is broken, tell us about it. We're a custom modeling and print shop, and we may be able to model a replacement.

FAQ

Which tables do these gears fit? Classic Sports Company bubble/rod hockey tables, approximately 20 years old.

Will they fit my Super Chexx, Carrom, MD Sports or Shelti table? No. They are not interchangeable with those or other common brands.

What comes in a set? 2 replacement actuating gears. The mounting carrier is not included.

How much is a set? $18 for one set of 2 gears.

Can I get a discount on several sets? Need more than one? Reach out, as discounts may apply.

Is the carrier included? No. The set is the 2 gears only. Reach out with your carrier dimensions and other details; we may be able to include one with your first order.

How hard is the repair? Most owners can do it with basic hand tools: remove the rod and player, remove the carrier, replace the gears in the carrier, then reinstall the carrier, rod and player.

How do I know they'll fit? Classic Sports tables rarely have serial numbers, so compare your mechanism and send us photos if you're unsure.

Can I return them if they don't fit? Our standard return policy applies.

Get your table back in the game

If you have a Classic Sports Company table with stripped gears, order the replacement gear set. Need several sets, or not sure it fits? Contact us with photos.

Related:

Steps to replace Classic Sports bubble hockey gears: remove rod and player, remove carrier, replace gears in carrier, reinstall carrier, reinstall rod and player, twist rod to check rotation
Next
Next

Hands-On STEM for Educators: Storm Sewer Models and a Reusable Volcano